Updated November 2026
Rampart Range 4×4 trails give Colorado Springs-area drivers a mix of forest two-ttrack, rocky climbs and high alpine views within a short drive of town. This guide explains how to pick a route that matches your vehicle and skill, when to go, and how to prep so you get back down the mountain with the same vehicle you drove up.
Choose a Route That Matches Your Vehicle and Experience
The Rampart Range sits in Pike National Forest west of Colorado Springs, and its roads range from graded gravel to rough, rutted tracks with exposed rock. Before you pick a route, check the current conditions with the Pike-San Isabel National Forest office, since closures and fire restrictions change often.
Shopping for one? See our guide: Wharton State Forest 4×4 Trails: 7 Best Maps and Guides for 2026.
Use these rough guides when sorting routes:
- Easy: Mostly graded gravel with short washboard sections. Passenger cars with good clearance can usually manage these.
- Moderate: Loose rock, ruts and steeper grades. A high-clearance vehicle with decent tires is the minimum.
- Difficult: Off-camber sections, large rock steps and washouts. Plan on a 4×4 with low range, skid protection and a recovery kit.
If you are new to this terrain, start on a segment you can turn around on and scout ahead on foot where the road is unclear.
Pick the Right Season
Most of the range is best from late June through September, after snowmelt has drained the lower roads and before the first fall storms. Higher sections can hold snow into early summer and may get snow again by late September. Afternoon thunderstorms are common in July and August, so plan to be off exposed ridgelines by early afternoon. Wet clay turns slick and deep after rain, so give the roads a day or two to dry before you go.
Prep Your Vehicle Before You Go
Preparation matters more here than on many beginner trails because cell coverage is patchy and help can be a long wait.
- Check tire pressure and set it for the terrain. Many drivers run lower pressures on loose rock, but confirm the right number for your tire size and load.
- Inspect the spare, jack and lug wrench. Confirm the spare is inflated and the jack works on your vehicle.
- Look over the undercarriage for loose skid plates, exposed brake lines and low-hanging exhaust.
- Top off fluids and carry a spare of any fluid your vehicle uses heavily.
- Download offline maps before leaving pavement. Mark your planned turnaround points.
Plan Your Recovery and Safety Gear
A basic kit should include a tow strap rated for your vehicle, traction boards, a shovel, a tire inflator, gloves, a first-aid kit, extra water and food, and warm layers. Tell someone your route and expected return time. Afternoon weather in the range can drop temperatures quickly, even in summer.
Common Mistakes to Avoid
- Driving on wet roads, which causes deep ruts that trap vehicles and damage the trail.
- Assuming a route on a map is open. Check closures before you leave.
- Ignoring lightning. Get off exposed ridges as soon as storms build.
- Traveling without offline navigation. Phone signal disappears in many canyons.
- Taking more vehicle than the trail needs. Choose a route that matches your rig, not the other way around.
Recommended Gear
- Traction boards: Useful for loose dirt and mud where tires lose grip; carry them where you can reach them quickly. View on Amazon
- Tire inflator: Lets you air back up after airing down for rocky sections. View on Amazon
- Offline GPS app or dedicated unit: Keeps your route and turnarounds visible without cell service. View on Amazon
FAQ
Do I need a 4×4 for the Rampart Range?
Not for the easiest graded roads, which many high-clearance vehicles can handle. Rockier and steeper routes are much safer with four-wheel drive and good tires.
When is the best time to drive the Rampart Range 4×4 trails?
Late June through September is generally best, once snow has melted and before fall weather arrives. Check current conditions and fire restrictions before you go.
Is cell service available on the trails?
Coverage is inconsistent and often absent in canyons and on remote sections. Download offline maps and tell someone your plans before you leave.
Conclusion
Match your route to your vehicle, time your trip for late summer, and prep for both mechanical trouble and weather changes. With those steps covered, the Rampart Range offers rewarding driving close to Colorado Springs. For more ideas, see Ouray CO 4×4 Trails: A Route Guide to Difficulty, Season and Prep or Telluride 4×4 Trails Near California: Routes, Difficulty and Prep (2026). Consult local rangers or a qualified recovery professional if you are unsure about a route.
